The Valid8 SIP Load Tester is capable of simulating and testing multiple devices individually or in parallel and is scalable to fit your needs.
SIP is a set of standards that define the protocols for audio-visual communication sessions over IP. They are both widely implemented by voice and videoconferencing equipment manufacturers.
The Valid8 VoIP Load Tester allows you to test phones, Endpoints, SBCs, Servers, PBXs, Gateways, and test load and feature interaction for audio and video. It enables continuous route testing through the network to report quality and find issues. It is useful for small and large carriers: ILECs, CLECs, ASPs, ISPs, as well as enterprise customers. It automates deterministic verification of routes and phone numbers across VoIP networks, saving time and increasing effectiveness and coverage of testing. Rules are set up in the tool to cycle through multiple network destinations and phone numbers according to the test plan. It reports on media received, call connect time, call duration, jitter, packet loss. It verifies equipment is working and configured as it should and helps check that SLAs are being met. It helps test VoLTE in the IMS network where prioritization of RTP packets and 911 emergency calls is critical and needs to be tested on a loaded network.
For testing the SIP Server, the Valid8 Tester can generate SIP calls to test performance and stability.
Message flows
Emulate Real Network Conditions
For testing the SIP Client, the Valid8 Tester can generate SIP calls to test performance and stability.
GTP, SCTP, S1-AP, MAP SIGTRAN Firewall
Protocol Specifications
SIP Load Tester
Actual throughput levels over radio may vary based on the 3rd party device manufacturer and software versions. Valid8 product specifications are subject to change at any time without notice.