Mobile Amarisoft Simbox
AMARI UE Simbox Specs, Application, 5G, 4G, 3GPP, LTE, NB-IOT, NR UE
AMARI UE Simbox Specs, Application, 5G, 4G, 3GPP, LTE, NB-IOT, NR UE
Overview
Amarisoft UE simulator is an ideal solution to support functional and performance testing of 4G and 5G networks. Acting as a 3GPP compliant LTE, NB-IOT and NR UE, it can simulate hundreds of UEs sharing the same spectrum.
What It Can Do For You
AMARI UE Simbox is an ideal solution to support functional and performance testing of 4G LTE eNodeB , 5G NR gNodeB and 4G/5G core networks. Acting as a 3GPP compliant LTE and 5G SA/NSA UE, it can simulate up to 1000+ UEs sharing the same spectrum with different types of traffic within multiple cells. It is also one of the first solutions supporting NB-IoT and Cat M. The offer is completed by an integrated IP simulation package for reproductible test results. Amarisoft also offers a tiny 4G and 5G core to wrap your eNB/gNB and allow an end to end testing.
AMARI UE Simbox E is an ideal solution to support functional and performance testing of 4G LTE eNodeB , 5G NR gNodeB and 4G/5G core networks. Acting as a 3GPP compliant LTE and 5G SA/NSA UE, it can simulate up to 1000+ UEs sharing the same spectrum with different types of traffic within multiple cells. It is also one of the first solutions supporting NB-IoT and Cat M. The major enhancement compared to AMARI UE Simbox Series is the support of 100 MHz cells. The offer is completed by an integrated IP simulation package for reproductible test results. Amarisoft also offers a tiny 4G and 5G core to wrap your eNB/gNB and allow an end to end testing.
Why It’s Different
Features
AMARI UE Simbox
- Up to 1000 UEs
- 800 Mbps DL, 150 Mbps UL
- 4CA
- MIMO 2x2, 4x4
- eMBMS
- LTE, LTE-M, NB-IoT
- 5G
AMARI UE Simbox E
- Up to 1000 UEs
- 1.5 Gbps DL, 1 Gbps UL
- 4CA
- MIMO 2x2, 4x4
- eMBMS
- LTE, LTE-M, NB-IoT
- 5G
Related Video
.png)
Additional Videos
Subsystems
KPIs
Report Counters
- Attach Requests/Successes/Fails
- Detach Requests/Successes/Fails
- Dedicated Bearer Requests/Successes/Fails
- Current Active Sessions/ Bearers
- Number of Sessions/ Bearers Created
- Attach Request Response Time
- Protocol Errors
- Message Timeouts
Configurable Parameters
- Mobile Country Code
- Mobile Network Code
- eNodeB Type
- IP Addres S1 Interface
- IP Address eNodeB
- Primary DNS Address
- Secondary DNS Adress
- MAC Address Public Gateway
- GTP Tunnel IP Address and Port
- GTP Tunnel eNodeB IP Address
- Integrity Algorithm
- IP Address to assign UEs on LAN
PRODUCT OPTIONS
Use Cases
eNodeB Under Test
In the scenario where the eNodeB is to be tested, it can be tested by the Valid8 4G Network Emulator emulating the core network. Additionally, load and conformance tests are available for interfaces S1-MME and S1-U. In the case where the eNodeB needs to be tested on the RF side, it can be tested by the Valid8 4G UE Emulator.
Supported Scenarios:
- Power on / Start up
- Attach
- TAU
- Attach
- eRAB Setup
- Detach
- X2 handover
- Emulates MME (for S1-MME) and SGW (for S1-U) along with all other needed core network elements, exposing all internal interfaces
- Conformance tests available for S1-MME, S1-U, and X2
gNodeB Under Test
In the scenario where the gNodeB is to be tested, it can be tested by the Valid8 5G Network Emulator emulating the core network. Additionally, load and conformance tests are available for interfaces N1/N2/N3. In the case where the gNodeB needs to be tested on the RF side, it can be tested by the Valid8 5G UE Emulator.
Supported Scenarios:
- Power on / Start up
- Attach/Registration
- Detach/Deregistration
- Session management
- Emulates AMF along with all other needed core network elements, exposing all internal interfaces
- Conformance & registration tests available for N1, N2, N3
Summary of Specifications
Specifications
Protocols
- 3GPP TS 23.401 (EUTRAN)
- 3GPP TS 24.301 (NAS)
- 3GPP TS 29.060 (GTPv1)
- 3GPP TS 29.274 (GTPv2-C)
- 3GPP TS 29.281 (GTPv1-U)
- 3GPP TS 36.413 (S1AP)
- 3GPP TS 36.414 (S1-U)
- IETF RFC5246 (TLS, Protocol (1.0, 1.1, 1.2))
- IETF RFC6101 (SSL, Protocol Version 3.0)
- IETF RFC793 (TCP)
- IETF RFC768 (UDP)
- IETF RFC4960 (SCTP)
- IETF RFC791 (IPv4)
- IETF RFC2460 (IPv6)
- IETF RFC3711 (SRTP)
- IETF RFC1035 (DNS)
- IETF RFC2131 (DHCP)
- IETF RFC3550 (RTP/RTCP)
- IETF RFC3261 (SIP)
UE
- Internal femtocell: 500 - 6000 Mhz; covering all sub-6GHz bands including unlicensed 5Ghz band, CBRS band and others
- Duplex: FDD & TDD
- Interface Uu from UE to RAN
- SIMs are software-based and configurable
- Range: 32ft (10m)
UEs Emulated
- Scalable; up to 256 per unit
UE Configuration
- IMSI
- IMEISV
- Secret key
- UE category
- Duplex mode
- Default APN
- Tunnel setup script
- Power on/off via script
- Simulation on user plane
Scenarios
- HTTP
- Ping
- Flooding
- VoLTE
4G Technical Specifications
- 3GPP Specification : LTE Release 8 support with features up to Release 15
- Frequency bands : All sub-6GHz bands, 500 - 6000 Mhz; including Bands 1 - 44 plus unlicensed 5Ghz band and others
- Bandwidth :0.2 (for NB-IoT), 1.4, 3, 5, 10, 15 and 20 MHz
- Carrier Aggregation: up to 4 carriers in DL and 2 carriers in UL
- MIMO : DL MIMO support up to 4x4
- Modulation schemes : up to 256 QAM in DL and UL
- AS encryption and Integrity protection :AES, SNOW3G, ZUC
- Handover : Intra-freq, inter-freq and inter-band Handovers
- Group communication : eMBMS as per Rel10
- IoT : LTE category 0 and 1, LTE-M cat M1, NB-IoT cat NB1 and NB2 UE categories. Category NB1 (NB-IoT) support with multi-tone and multi-DRB.
- UE Categories : Cat0, Cat1, Cat2, Cat3, Cat4, Cat15 with 4CCs in DL and Cat13 with 2 CCs in UL
- Subframe configuration: 0 to 6 supported
- Transmission Mode: up to TM10
- Number of active users : 1000+ UEs (see table page 4 for details)
- Number of active cells : 4 cells MIMO 2x2 or 2 cell MIMO 4x4
- IP traffic : simulation of TCP, UDP, RTP, HTTP and VoIP with configurable packet size as well as support of external applications such as iperf
5G Technical Specifications
- 3GPP Specification : Release 15
- Frequency bands : All sub-6GHz bands, 500 - 6000 Mhz; including Bands 1 - 44 plus unlicensed 5Ghz band and others
- Bandwidth : 1.4, 3, 5, 10, 15, 20, 50 MHz.
- Carrier Aggregation: up to 4 carriers in DL and 2 carriers in UL
- MIMO : DL MIMO support up to 4x4
- Modulation schemes : up to 256 QAM in DL and UL
- Subcarrier spacing : All SSB/data subcarrier spacing combination
- Supported Modes : NSA and SA
- NSA NR split bearer : 3, 3a, 3x
- Use case : eMBB
- Number of active users : 1 UE
- Number of active cells : 1 cell
- IP traffic : simulation of TCP, UDP, RTP, HTTP and VoIP with configurable packet size as well as support of external applications such as iperf
Automation
- HTTP API
Max output power
- 31 mW (femto RF module option)
Connector types
- Femtocell: SMA female
Power supply
- 520W AC to DC, 100 - 240v
Product Details
Emulates UE to test the base station and core. Actual throughput levels over radio may vary based on the 3rd party device manufacturer and software versions. Valid8 product specifications are subject to change at any time without notice.
Hardware products containing RF modules are designed to be used for laboratory testing purposes only. Furthermore, in order to comply with FCC rules, the user must:
- - use cabling to connect RF modules, or
- - use the hardware products within RF shielded chambers when radiating with antennas, or
- - obtain FCC approval for using the hardware products in another manner.
Related Protocols
Valid8 exports its products strictly in accordance with all US Export Control laws and regulations which shall apply to any purchase or order. Specifications are subject to change without notice.
p: +1-855-482-5438
f: +1-781-996-3708
welcome@valid8.com
