|
|
|
| E1/T1/J1 Dual-Port PCMCIA Card / ExpressCard |
|
|
|
The E1/T1/J1 Dual-Port PCMCIA card or ExpressCard enables protocol simulation or analysis testing on a portable laptop platform.
It supports two G.703 RJ-48 interfaces for simulation or one interface for passive protocol analysis (one interface for receive, one interface for transmit).
|
| |
Benefits:
- Allows simulation and monitoring on a portable laptop
- Compact footprint
|
Suitable for:
- Development and QA test lab environments
- Verifying protocol compliance
- Negative and robustness testing
- Regression testing
- Reproducing customer issues in the field
- Proof of concept
|
Features at a glance:
- PCMCIA card or ExpressCard option.
- 2 T1/E1/J1 interfaces. Software switchable between T1, E1, and J1.
- Supplied with two dongles (one for each T1/E1/J1 interface).
- Software switchable line termination (High-impedance, 75 and 100/120 ohm)
- Dongles equipped with software-switchable 20dB signal amplifier and High-Impedance mode for Monitor applications.
- Support for all common T1/E1/J1 Frame Formats and Line Codes
- Standard RJ-48 connector. Pin out:
1=Rx -
2=Rx +
3=Not connected
4=Tx -
5=Tx +
6=Not connected
7=Not connected
|
| |
Product Details:
Protocols Tested:
|
Purchasing Details:
Each package is for installation on a single MS-Windows PC platform
|
Current hardware requirements:
- Intel® Pentium® (or compatible) 2 GHz or higher processor
- Windows® XP, Windows 7
- 1GB of RAM or higher
- 10 GB of available hard disk space
- Network Interface Card (Ethernet 10/100/1000bT)
- PCMCIA slot
|
Product ID(s) &Options:
- V82001/01 - E1/T1/J1 Dual-port PCMCIA card
- V82001/02 - E1/T1/J1 Dual-port ExpressCard
- Yearly Support and Maintenance plans available.
|
|
| |
|
|
